Difference between revisions of "MC-Basic:IDNVALUE"
m (Text replace - "''<connection>''" to "<''connection''>") |
m |
||
| Line 17: | Line 17: | ||
|TYPE= | |TYPE= | ||
| − | '' | + | <''returned value''>: Long |
| + | |||
|RANGE= | |RANGE= | ||
<''drive address''>: 1 to 254<br> | <''drive address''>: 1 to 254<br> | ||
| Line 23: | Line 24: | ||
<''element''>: 1 to 7 | <''element''>: 1 to 7 | ||
<''ring''>:1 | <''ring''>:1 | ||
| − | |||
<''connection''>:0 to 2 for normal systems (0 = chose automatically, 1 = first AT connection, 2 = first MDT connection) | <''connection''>:0 to 2 for normal systems (0 = chose automatically, 1 = first AT connection, 2 = first MDT connection) | ||
Revision as of 10:59, 26 March 2014
This function is used to read the value of a specified element of an IDN from a specified drive. It should be used when reading an IDN that takes numeric values.
Use the IDNSTATE query to read the execution state of a SERCOS procedure executing on the drive.
Short form
Ival
Syntax
IdnValue (<drive address>, <IDN>, <element>, {<ring>}, {<connection>} )
Availability
All versions {<ring>}, {<connection>}) options - from Since Version 4.7.12 for SERCOS III
Type
<returned value>: Long
Range
<drive address>: 1 to 254
<IDN>: 1 to 65536
<element>: 1 to 7
<ring>:1
<connection>:0 to 2 for normal systems (0 = chose automatically, 1 = first AT connection, 2 = first MDT connection)
Scope
Configuration, Task or Terminal
Limitations
- Read only
- Executed only in SERCOS communication phases 2, 3 and 4.
- The IDN must be defined
- Not supported in EtherCAT system
Examples
?IdnValue(1, 189, 7) ‘Get drive position following error
?IDNVALUE (<drive>, <idn>, <element>)
?IDNVALUE (<drive>, <idn>, <element>, <ring>)
?IDNVALUE (<drive>, <idn>, <element>, , <connection>) --> Translator note: Ring number is zero
?IDNVALUE (<drive>, <idn>, <element>, <ring>, <connection>)