Difference between revisions of "AXY:MC-Basic:axis.DYNAMICMODEL"
m (Text replace - "FW 4.7.14" to "Since Version 4.7.14") |
|||
| Line 17: | Line 17: | ||
: No dynamic model. All dynamic computation during axis motion for this axis are disabled. | : No dynamic model. All dynamic computation during axis motion for this axis are disabled. | ||
;1 .. | ;1 .. | ||
| − | : See [[ | + | : See [[Dynamic Models]] for a list of available axis models. |
: Model dependent parameters are expected to be set in [[Axystems:MC-Basic:axis.DYNAMICPARAMETER]]. | : Model dependent parameters are expected to be set in [[Axystems:MC-Basic:axis.DYNAMICPARAMETER]]. | ||
Revision as of 08:34, 22 May 2014
Dynamic model of an axis.
The dynamic model calculates needed torques/forces during a commanded motion. The torques are then sent to the drives as "additional torque command" (torque feed forward), which helps to improve the motion performance.
Possible values:
- 0
- No dynamic model. All dynamic computation during axis motion for this axis are disabled.
- 1 ..
- See Dynamic Models for a list of available axis models.
- Model dependent parameters are expected to be set in Axystems:MC-Basic:axis.DYNAMICPARAMETER.
Syntax
<axis>.DynamicModel = <expression>
Availability
Since Version 4.7.14
Type
Long
Range
0, 1 .. 15
Default
0 (No dynamic model)
Scope
Task and Terminal
Limitations
- Read/Write
- Modal only