Difference between revisions of "MC-Basic:axis.RTSB2 MODE"
m (Text replace - "''<value>''" to "<''value''>") |
m |
||
| Line 10: | Line 10: | ||
|DESCRIPTION= | |DESCRIPTION= | ||
| − | In SERCOS, realtime status bit #2 is set to reflect the status of certain binary signal IDNs by writing the IDN of that signal to IDN 305. Then, the realtime status bit shows 1 or 0, according to the state of the specified IDN. This property encapsulates the operation for status bit #2 by enabling you to specify only the IDN of the function to be reflected. This is useful for CAPTURE, for example, where IDN 409 indicates whether capture has | + | In SERCOS, realtime status bit #2 is set to reflect the status of certain binary signal IDNs by writing the IDN of that signal to IDN 305. Then, the realtime status bit shows 1 or 0, according to the state of the specified IDN. This property encapsulates the operation for status bit #2 by enabling you to specify only the IDN of the function to be reflected. This is useful for CAPTURE, for example, where IDN 409 indicates whether capture has occurred. |
Realtime status bit #2 appears as bit 7 in the drive status word. This word is read using <''axis''>.DRIVESTATUS. | Realtime status bit #2 appears as bit 7 in the drive status word. This word is read using <''axis''>.DRIVESTATUS. | ||
| + | |||
{{Note/Important| '''THIS PROPERTY IS OBSOLETE'''}} | {{Note/Important| '''THIS PROPERTY IS OBSOLETE'''}} | ||
| + | |||
| + | |||
|TYPE= | |TYPE= | ||
| Line 20: | Line 23: | ||
|RANGE= | |RANGE= | ||
| − | Any IDN that can be | + | Any IDN that can be terminated using this mechanism. |
|UNITS= | |UNITS= | ||
| Line 35: | Line 38: | ||
|EXAMPLE= | |EXAMPLE= | ||
| − | a1.rtsb2_mode = | + | a1.rtsb2_mode = 409 |
| + | :::: Terminal capture state on RTSB #2 | ||
|SEE ALSO= | |SEE ALSO= | ||
Revision as of 10:37, 19 March 2014
In SERCOS, realtime status bit #2 is set to reflect the status of certain binary signal IDNs by writing the IDN of that signal to IDN 305. Then, the realtime status bit shows 1 or 0, according to the state of the specified IDN. This property encapsulates the operation for status bit #2 by enabling you to specify only the IDN of the function to be reflected. This is useful for CAPTURE, for example, where IDN 409 indicates whether capture has occurred.
Realtime status bit #2 appears as bit 7 in the drive status word. This word is read using <axis>.DRIVESTATUS.
 | IMPORTANT |
| THIS PROPERTY IS OBSOLETE |
Syntax
<axis>.RTSB2_Mode = <value>
Availability
All versions
Type
Long
Range
Any IDN that can be terminated using this mechanism.
Scope
Configuration, Task or Terminal
Limitations
Can only be set during SERCOS communications phase 4.
Examples
a1.rtsb2_mode = 409
- Terminal capture state on RTSB #2