Difference between revisions of "AXY:MC-Basic:group.BLENDPROTECTED"

From SoftMC-Wiki
Jump to: navigation, search
(Created page with "<ELEMENT>.BlendProtected Short Form None Syntax ?<element>.BlendProtected Availability 4.5.x and above Description Sets the protected part of the move that is guaranteed not goin…")
 
 
(20 intermediate revisions by 5 users not shown)
Line 1: Line 1:
−
<ELEMENT>.BlendProtected
+
<!-- {{Languages|MC-Basic:group.BLENDPROTECTED}}
−
Short Form None
+
{{MC-Basic
−
Syntax ?<element>.BlendProtected
+
|SHORT FORM=
−
Availability 4.5.x and above
+
None
−
Description Sets the protected part of the move that is guaranteed not going to be blended.Percentage of the current motion path (measured from the end) that is going to be executed completely separated from the previously entered motion.
+
|SYNTAX=
−
Has a higher priority than the BlendingFactor. This means if two motions of same length are blended and Bfactor = 50 and Bprotected = 60 the superposition of the two motions will start at 40% of the path of the first move.
+
?<element>.BlendProtected
−
 
+
|AVAILABILITY=
−
Illustration 4: Blending Factor = 50 BlendingProtected = 0
+
4.5.x and above
−
 
+
|DESCRIPTION=
−
 
+
{{AXY:BlendProtectedDescription}}
−
Illustration 5: Blending Factor = 50 BlendingProtected = 60
+
|TYPE=
−
 
+
Double
−
 
+
|RANGE=
−
Defines the smallest amount of the motion that is not blended, which means that according to the blending conditions the un-blended part of the second move can be longer but not shorter then the given percentage given in BlendProtected.
+
0-100
−
Setting any value > 0 means that the next movement won't be blend although the blendingfactor is defined.
+
|UNITS=
−
NOTE
+
path length percentage
−
Applicable only with BlendingMethod = 2 and time-based profile active (prftype=2).
+
|DEFAULT=
−
Type Double
+
0
−
Range 0-100
+
|SCOPE=
−
Units path length percentage
 
−
Default 0
 
 
Scope Configuration, Task or Terminal
 
Scope Configuration, Task or Terminal
−
Limitations Modal/Nodal
+
|LIMITATIONS=
−
Example ?Ax1.BlendProtected
+
Nodal-only
−
See Also
+
|EXAMPLE=
 +
MOVE G1 {10,10} BlendProtected=50
 +
|SEE ALSO=
 +
* [[MC-Basic:group.BLENDINGFACTOR| BLENDINGFACTOR]]
 +
* [[MC-Basic:group.BLENDINGSTARTCONDITION| BlendingStartCondition ]]
 +
* [[MC-Basic:group.PROFILERTYPE| ProfilerType ]]
 +
* [[Time Based Profile (Trapezoidal Acceleration)| Time Based Profile]]
 +
}}
 +
-->

Latest revision as of 06:23, 14 August 2017

Retrieved from "http://softmc.servotronix.com/index.php?title=AXY:MC-Basic:group.BLENDPROTECTED&oldid=130239"