MC-Basic:pls.PLSOUTPUT

From SoftMC-Wiki
Revision as of 14:04, 10 October 2018 by Guy (talk | contribs)
Jump to: navigation, search

This property sets or queries the output associated with a PLS.

Short form

<pls>.Pout

Syntax

<pls>.PlsOutput = <system output>

?<pls>.PlsOutput

Availability

All versions

Range

Digital outputs: System.DOut.1 to 20

Virtual outputs: System.VOut.1 to 32

Default

The output associated with the PLS is defined when the PLS is declared (use COMMON SHARED <name> AS PLS).

Scope

Configuration, Task or Terminal

Limitations

Can be set only when PLS is disabled.

The system output must exist. This property can be assigned only after successful completion of fieldbus (CAN/EthetCAT) setup.

PLS high accuracy (HWAssistance) is limited to System.DOut from 1 to 8.

Examples

PLS1.Pout = System.DOut.5

?PLS1.PlsOutput                                         ‘returns “System.DOut.5”

See Also