MC-Basic:movingFrame.FILTERFACTOR

From SoftMC-Wiki
Revision as of 09:18, 22 May 2014 by Miborich (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

In Absolute Tracking Algorithm: A moving frame property that determines the approaching phase rate. This factor influences the speed of synchronization process. Other properties that influence this state are the element kinematics limits (velocity, acceleration and jerk).

In Relative Tracking Algorithm: Defines the threshold criteria when the approaching phase finish and the tracking phase starts. It is the scale factor for the position and velocity units determined by the maximum velocity and acceleration of the robot.

Note : that values of FiterFactor and DampingFacor can significantly influence the synchronization (approaching phase) behavior so it is strongly recommended to use small values in the beginning and to increase them step-by-step until the desired results are obtained.

Syntax

<Moving Frame>. FilterFactor = <value>

Availability

Versions 4.0.26 and higher

Type

Double

Range

0.00001 to MaxDouble

Default

1.0

Scope

Task or Terminal

Examples

CNV.filterfactor = 0.5

See Also