MC-Basic:element.JERKRATE

From SoftMC-Wiki
Revision as of 15:56, 24 October 2017 by Chi (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Language: English  • 中文(简体)‎

This property defines the element Jerk maximum scaling factor. Maximum values of Jerk can be scaled independently of velocity, acceleration or deceleration.

Changing JerkRate factors of a group automatically changes the relevant factor of each axis to the new value.

Short form

<element>.JRate

Syntax

<element>.JerkRate = <expression>

?<element>.JerkRate

Availability

Since Version 4.0.1

Type

Double

Range

0.1 to 100

NOTE-Info.svgNOTE
Contrary to other properties if a value beyond the given range is assigned to rate properties (Vrate,Arate,Jrate, ...),only a NOTE will be returned and the value will be automatically limited to min-max value.
For example Vrate = 0 will set Vrate to 0.1 and vrate = 1000 will set vrate to 100.

Units

Percents

Default

100

Scope

Task or Terminal

Limitations

To set the value within a task, the element must be attached to that task or from a command line (using the ATTACH command).
The total JerkRate value is combination of the system’s value and the element’s.

Examples

Axis
Setting A1.Jrate = 50 will cause the system to reduce maximum jerk value to 50% of its original value. This means the motion jerk will not exceed: (sys.jrate/100)*(A1.jrate/100)*A1.jmax </br>

?A1.Jrate

Group
Setting G1.Jrate = 50 will cause the system to reduce maximum jerk value to 50% of its original value. This means the motion jerk will not exceed: (sys.jrate/100)*(G1.jrate/100)*G1.jmax

?G1.Jrate

See Also